2025 Larson Cable trailers LCT LCT-7500

2025 Larson Cable trailers LCT LCT-7500

The LCT-7500 comes standard with a V-twin engine with a 2 stage hydraulic system for high speed or high torque, 1 arbor with a set of bushings and lock collars for a single reel, auxiliary quick couplers for operating hydraulic tools, a hand brake on the reel turning axle and a wood deck. This trailer has a 7,500lb payload capacity and is equipped with (2) 6,000lb Dexter Torflex Axles.

While the overall design and unique features of the Larson Cable Trailer are patented, the trailers non captive parts are universally available simplifying routine maintenance and repair. Most moving parts may be obtained at your local parts or hardware stores. All hoses have a 3000 psi capability and have standard JIC fittings, which can be purchased anywhere hoses and fittings are sold.

Features may include:

The Hydraulic Reel Turner is used to unwind or rewind cable. It can be adjusted to drive a wide range of cable spool sizes and combinations. When handling inner duct, the Hydraulic Reel Turner assists in holding the inner duct on the reel for better control and easier handling. The Reel Turner is equipped with a mechanical disc brake to provide drag or prevent back lashing when figure 8ing or stringing out cable.

The Hydraulic Lifting Rack makes loading and unloading a simple, one person operation. The lifting rack has the strength to raise large reels, transformers, loaded dumpster and more. It also features adjustable arm length setting for 6 foot to 12 foot diameter cable or inner duct reels. Larson Cable Trailers are capable of lifting and carrying 4 small or 2 medium reels.

When loading heavy reels, Stiff Legs are used on the single axle trailers to support the rear of the trailer. Using this feature will avoid any unnecessary stress to the tongue of the trailer or vehicle pulling the Larson Cable Trailer.

Our greasable Arbor Bushings allow the reel to spin with minimal resistance. The Lock Collars lock the reel in place to prevent side to side movement, as well as providing a hook to attach the dumpster chains. Also used to tie to materials you may want to lift up onto the trailer bed.

For a smoother ride we build each Larson Cable Trailer on a Dexter Torflex Axle. At any posted highway speed limit, the trailers smooth ride is both safer for the driver and easier on the trailer and its cargo.

The Hydraulic Valve Control Panel swings out from the trailer, allowing a single crew member to view and operate the Hydraulic Reel Turner and Figure 8 assembly. When not in use the control panel swivels out of the way and is secured easily with a locking mechanism.

When not carrying cable reels, the trailer can be used as a 5 foot by 6 foot flatbed trailer for hauling small equipment and other materials. The trailer bed features treated wood decking, for long life and durability.

The Auxiliary Hydraulic couplers enable you to use other hydraulic tools such as a hydraulic drill (impact wrench), ground rod driver, and more. The Accessory Port is used to run attachments such as the Level Winding Device, cap stand, or other attachments.

Our 5620 and 7500 model trailers are powered by a V-twin Engine operating a 12 GPM hydraulic system. The V-Twin engine has proven to be a reliable power source that can be serviced almost anywhere.